Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 50)

50 Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
Chapter 2 Create a PanelView Plus Application
5. Press the push button and verify that the indicator turns on and that the light on the
Compact digital output module turns on.
6. Press the push button again and verify that the indicator and light turn off.
Additional Resources
For a list of additional resources that might assist you when creating a PanelView Plus
application, see
page 11 .