Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 47)

Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012 47
Create a PanelView Plus Application Chapter 2
2. Check Initial graphic and select
PanelView_Plus_project, or
the initial display name if
different, from the pull-down
menu.
3. Click OK.
4. Save your changes.
Transfer to PanelView
Plus Terminal
1. From the Application menu,
choose Create Runtime
Application.
2. In Save as type, select the
Runtime version that matches
your PanelView Plus firmware.
To check the PanelView Plus
firmware revision, on the
terminal select Terminal
Setting [F4]  System
Information  About
FactoryTalk View ME Station
3. Click Save to accept the default
file name.