Rockwell Automation Logix5000 Control Systems: Connect PanelView Plus Terminals over EtherNet/IP Quick Start - Manual (Page 7)

Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012 7
Preface
Configure the
networks Complete required tasks associated with the networks used in your application. For instance, as assign an IP
address to the controller or to a communication module in your Logix5000 control system.
Create an
RSLogix 5000 project Create a project to be used with your Logix5000 controller. A project includes all desired control system
components and necessary programming. For example, add ladder logic to test tasks associated with individual
system components..
Table 1 - Required Tasks To Complete Before Using This Quick Start
Task Description