Metrohm tiamo 1.3 Manual - Manual (Page 280)

254 Database
If this option is enabled then the evaluation lines (tangents, auxiliary lines)
will be shown.
Tangents
Color selection, [ green ]
Selection of the color for the tangents and auxiliary lines.
Auxiliary lines
Color selection, [ blue ]
Selection of the color for the auxiliary lines.
Result view
In the subwindow Result view of the dialog window Reprocessing modifications re-
sults and raw date are displayed on the following two tabs:
• Results overview
Here the calculated results and the variables used for them in the CALC
commands will be shown and updated at each recalculation.
• Raw data
Here the raw data calculated for the measuring commands will be shown
and updated at each recalculation.
Results overview
On the tab Results overview of the subwindow Result view the calculated results
and the variables used for them in the CALC commands will be shown and up-
dated at each recalculation.
For each CALC command the following items are shown:
Title
Name of the CALC command.
Result
Result name, result value with defined number of decimal places, units.
Statistical evaluations