Metrohm tiamo 1.3 Manual - Manual (Page 643)

Commands 617
5.6.12 Miscellaneous commands
These commands can be used independently from the connected devices.
The following five commands can be selected:
•
CALL
Calling tracks.
• LOOP
Multiple execution of a command sequence.
• WAIT
Interrupting the method run.
• REQUEST
Requesting sample data.
•
SEQUENCE
Combining several commands to one command.
REQUEST
Command for requesting sample data during the method run. The data can ei-
ther be entered manually or sent by a peripheral device (balance, barcode
reader).
Appearance
The command has the following appearance:
Parameters
The parameters for the command REQUEST are configured in the following dialog
window:
• REQUEST
REQUEST - properties