Metrohm tiamo 1.3 Manual - Manual (Page 756)

730 Configuration
0.1 ... [ 12.0 ] ... 999.9 h
Time interval after which the request to prepare the dosing device will ap-
pear.
Connected devices
Information about the following peripheral devices connected to the MSB connec-
tion appears here:
•
Dosing device
The Dosing device type is shown here for the connected dosing devices; for
type 8xx dosing devices the Dosing device serial number is also shown.
•
Stirrer
The Stirrer type and Stirrer serial number are shown here for the connected
stirrers.
•
Remote box
No properties can be shown for a connected remote box.
GLP
GLP test date
Date selection
Date of the last GLP test. This date can be selected after pressing in the
dialog window Select date (see General program functions - Edit - Select
date).
Comment on GLP test
1000 characters, [ empty ]
Comments about GLP test.
Monitoring of GLP validity
on, [ off ]
If this option is switched on then the time interval for the GLP test will be
monitored.
Note
This option can only be switched on when a date has been entered under GLP
test date .
GLP test interval
0 ... [ 999 ] days