Metrohm tiamo 1.3 Manual - Manual (Page 718)

692 Configuration
The table of devices is shown in the required format as a PDF file and can
be opened directly with the Acrobat Reader; it can then be printed out
and/or saved.
6.5.3 Device properties
Overview
With the menu item Edit, Properties... in the subwindow Devices the properties win-
dow opens for the device selected in the device table in which the parameters of
the device can be edited. It consists of several tabs. The tabs General and GLP are
always present, the remaining tabs depend on the selected device. Properties can
be set for the following devices:
• 808, 809, 835, 836, 841, 842, 857, 888, 890 Titrandos
• 846 Dosing Interface
• 702, 716, 718, 719, 720, 721, 736, 751, 758, 784, 785, 794, 795, 798, 799
Titrinos
• 730 Sample Changer
• 774 Sample Changer
• 778, 789 Sample Processors
• 814, 815 USB Sample Processors
• 855 Robotic Titrosampler
• 756, 831 Coulometers
• 712 Conductometer
• Universal RS232 device
• Balances
• Barcode readers
Titrando
The parameters for the 808, 809, 835, 836, 841, 842, 857, 888 and 890 Titran-
dos are set on the following tabs:
•
General
General device information such as device name, device type, serial num-
ber, etc.
•
Measuring inputs
Properties of the measuring inputs.
•
MSB #
Properties of the MSB connections 1...4 and the peripheral devices con-
nected to them.
•
GLP
Information about GLP test and GLP monitoring.