Metrohm tiamo 1.3 Manual - Manual (Page 723)

Subwindow Devices 697
Stop determination
The running determination will be automatically terminated. The following
message must be confirmed with [OK] .
Titrino
The parameters for the 702, 716, 718, 719, 720, 721, 736, 751, 758, 784, 785,
794, 795, 798 and 799 Titrinos are set on the following tabs:
•
General
General device information such as device name, device type, serial num-
ber, etc.
•
Int. dosing device D0
Properties of the internal dosing device.
•
Ext. dosing device D1/D2
Properties of the connected external dosing device (685 Dosimat or 700
Dosino).
Note
These tabs for external dosing devices are only present for 736, 751, 758 and
799 Titrinos.
• RS232
Selection of the serial interface to which the Titrino is connected.
• GLP
Information about GLP test and GLP monitoring.
General
Device name
50 characters, [ device type number_# ]
Name of device (can be freely defined by user).
Device type
Shows the type of device.
Program version
Shows the program version of the device.