Ultra-cut 100 xt – Tweco 100 Ultra-Cut Plasma Cutting System with Automated Gas Control User Manual
Page 52
Advertising
ULTRA-CUT 100 XT
3-2�
INSTALLATION
Manual 0-5303
4. Secure the thin nut on the through hole protector so both nut faces are tight against the sheet metal inside
and out.
Art # A-09149_AB
5. Plug the Fiber Optic Cable into the PCB as shown below. Make sure the locking tabs are engaged.
Fiber Optic Cable to/from
CCM plugs in here
Art # A-11999
Advertising