Ultra-cut 100 xt – Tweco 100 Ultra-Cut Plasma Cutting System with Automated Gas Control User Manual
Page 58
Advertising
ULTRA-CUT 100 XT
3-3�
INSTALLATION
Manual 0-5303
Input Connections
1. Refer to the illustrations. Make the following input connections to the Arc Starter.
• Coolant Supply and Return Hoses (from HE-400 Heat Exchanger). Hoses and connectors are color-
coded; Red for Return, Green for Supply.
Coolant Supply and Return Hoses
(from power supply)
Art # A-12061
Supply
Return
Coolant Return (Red)
Coolant Supply (Green)
Art # A-12062
Green
Red
Advertising