Hoist hoppers, Release hopper mount, Remove hopper assembly – Great Plains 2007HD Update Installation User Manual
Page 19: Release hopper mount remove hopper assembly
Great Plains Manufacturing, Inc.
Dismount Hoppers
15
05/25/2011
166-370M
Hoist Hoppers
Release Hopper Mount
Refer to Figure 22 (shown with hoppers floating - leave hop-
pers attached to mount)
68. At each corner of the hopper mount
, remove
and save two sets (8 sets total) of:
803-020C NUT HEX 1/2-13 PLT
804-015C WASHER LOCK SPRING 1/2 PLT
804-017C WASHER FLAT 1/2 USS PLT
802-082C HHCS 1/2-13X1 3/4 GR5
Remove Hopper Assembly
Pinch / Crush Hazards:
Use an adequate hoist or lifter. Use three or more lines, each
rated for at least half the load. Place lines where they cannot
slip. The assembly weighs nearly 550 kg (1200 pounds).
Refer to Figure 23
69. Attach lines to the hopper assembly. Carefully lift it
off the cart frame. Set it on the supports.
Figure 22
Hopper Mount at Frame
31108
122
121
167
188
187
177
122
177
187
188
167
Figure 23
Hoisting Hopper Mount
Q0102