Hose id for pull link clamping, Connect hoses and harnesses – Great Plains 2007HD Update Installation User Manual
Page 65
Advertising
Great Plains Manufacturing, Inc.
Re-Hitch Implement
61
05/25/2011
166-370M
Refer to Figure 97 on page 60, and the table at right
349. Route hydraulic hoses and harnesses through clips
and under clamps on new pull link.
Connect Hoses and Harnesses
Refer to Figure 98
350. At the bulkhead at the left rear of the cart, plug in all
hydraulic hoses and cables. Some cable connects
may not be at the bulkhead.
Hose ID for Pull Link Clamping
c/o
Part No.
Descriptor
A
Marker (option)
B
Marker (option)
C
Implement Lower
D
Implement Lift
E
Lock/Fold
F
Unfold/Transfer
G
SUMP
Figure 98
Cart Bulkhead Ports
848-526C
Advertising
This manual is related to the following products: