Connect new wsmb #6 – Great Plains 2007HD Update Installation User Manual
Page 55
Great Plains Manufacturing, Inc.
Update Harness
51
05/25/2011
166-370M
Connect New WSMB #6
Refer to Figure 77 (on page 45) and Figure 83 (which is part
of the full harness diagram found on page 88 and 89)
304. Select one new:
467981201A INT AG HARNESS, WSMB MODULE
Connect the 12-pin receptacle leads
WSMB
.
305. Select one saved:
Plug this component into the 6-pin receptacle
lead
of the WSMB harness.
Note: The final 4-pin power connector is not terminated.
306. Select one new:
467751320S1 DJ 12 ROW HARNESS
Connect the WSMB’s 12-pin plug leads
12-pin receptacle leads of the row harness
.
307. Use cable ties to secure the row harness core to
Tower H.
308. Select two saved 4.6 m (15ft) extensions:
459680922 EXT. HARNESS 15’ FAN RPM
Connect these to harness sensor leads 1 and 2.
309. Connect the 3-pin sensor leads
or extensions to
their respective fertilizer row blockage sensors, per
the chart on page 87 and the diagram on page 89.
310. Secure all harness routings with cable ties.
Figure 83: Tower H
Q0118
WSMB
3
WSMB
6
(New)
H
E
933
935
934
935
c
933
d
933