Attach pull bars – Great Plains 2007HD Update Installation User Manual
Page 33
Great Plains Manufacturing, Inc.
Update Cart
29
05/25/2011
166-370M
Attach Pull Bars
Refer to Figure 47
163. Select two sets:
805-412C PIN CLEVIS 1 X 4.13 USBL
804-028C WASHER FLAT 1 USS PLT
805-058C PIN COTTER 3/16 X 2
164. Bring the non-adjustable ends of the pull bars into
alignment with the anchors
at the main wheels.
Secure with pin
, washer
and cotter
.
Refer to Figure 48
165. At the hitch, adjust the turnbuckles until the adjuster
clevis
holes align with the hole in the plate
.
166. Select two sets:
805-134C PIN CLEVIS 1 X 2 29/64 USABLE
402-011D SLEEVE, SPRING LINK MOUNT
802-152C HHCS 1/4-20X2 GR5
803-007C NUT LOCK 1/4-20 PLT
Insert the pin
from below. Add a sleeve
,
secure with bolt
and lock nut
.
167. With the jam nut
still loose, tighten the
turnbuckle nut
to a torque of:
136 N-m (100 foot-pounds)
168. Tighten the jam nut
to just over Grade 2 torque:
1336 N-m (1000 foot-pounds)
Figure 47
Pull Bar on Anchor
Q0112
923
967
958
962
967
958
962
923
967
958
962
Figure 48
Pull Bars on Plate
Q0105
922
928
952
929
949
946
9
928
922
965
929
946
949
965
929
946
949
952
952