Great Plains 2007HD Update Installation - Manual (Page 62)

58 NTA607HD or NTA2007HD Table of Contents Index Great Plains Manufacturing, Inc.
166-370M Table of Contents Index 05/25/2011
Connect Cart and Implement
Refer to Figure 93
337. Select two saved:
160-323H PIN WLDMNT 1.25 X 15.66 NR
338. Bring the cart arm lugs into alignment with the
front pivot tubes of the new pull link . From the
inside of the two inner cart lugs, insert the weldment
pins
.
339. Select two saved:
805-255C PIN ROLL 3/8 X 2 1/2 PLT
Secure the weldment pins with roll pins .
Re-Install Link Components
Refer to Figure 94
340. On the new pull link
, install all clamps, clips,
brackets and their fasteners removed at step 47 on
page 11. This might include:
502-068D HYD HOSE CLAMP BRACKET
800-052C HOSE CLIP 5/8 I.D.
800-064C HOSE CLIP 13/16 ID
802-007C HHCS 5/16-18X3/4 GR5
802-012C HHCS 5/16-18X1 1/2 GR5
802-115C HHCS 5/16-18X2 GR5
804-009C WASHER LOCK SPRING 5/16 PLT
plus the:
160-760D TRANSPORT LOCK PIN 1 X 8.25
160-763D NTA607HD PIN STORAGE BRACKET
Secure bolts loosely, as hoses and harnesses need
to be routed.
Store Spacers
341. Store the existing spacer set:
810-442C MW STOP BUSH SET 1 1/4 SBS125
on the wire loops of the new pull link.
Store New Lift Pins
Refer to Figure 94
342. Select two new:
805-306C HITCH PIN 1X3 1/4 W/COTTER
Store each these in the lug holes provided.
Figure 93
Hitch Cart to Pull Link
31422
110
110
200
200
902
1
110
1
902
110
200
110 200
Figure 94
Clamp Re-Installation
31238
156
158
184
169 155
164
117
116
156
155
165
184
158
184
155
966
208
902
155
156
158
164
165
169
184
116
117
208
966