Install wsmbs, Mount center wsmbs, Mount tower b wsmb – Great Plains 2007HD Update Installation User Manual
Page 47: Mount tower c wsmb, Mount tower b wsmb mount tower c wsmb
Great Plains Manufacturing, Inc.
Update Harness
43
05/25/2011
166-370M
Install WSMBs
Mount Center WSMBs
Mount Tower B WSMB
Refer to Figure 73
256. Select one new:
166-988D BRACKET, 45DEG MODULE MOUNT
and one saved:
806-010C U-BOLT 1/2-13 X 2 1/2 X 3 1/2
and two sets saved (not shown):
804-015C WASHER LOCK SPRING 1/2 PLT
803-020C NUT HEX 1/2-13 PLT
Install the bracket
behind Tower B (left center
seed tower), just above and parallel to the angle
that secures both towers to each other. Orient the
WSMB mounting face to the outside and forward.
Secure to tower with U-bolt
, lock washers
and nuts
. To avoid crushing the tower tube,
tighten only to Grade 2 torque specification.
257. Select the saved WSMB tagged as “2”:
467981100S1 INTAG WSMB MODULE 18R
and two sets new or saved:
804-006C WASHER LOCK SPRING 1/4 PLT
802-370C HHCS 1/4-20X1 3/4 GR5
Install WSMB
on the outside (wing side) of the
bracket
, with the connector ports facing down
and to implement rear. Insert bolts (
)
through the WSMB and bracket. Secure with lock
washers (
or
) and nuts
Mount Tower C WSMB
Refer to Figure 74
258. Select one new:
166-988D BRACKET, 45DEG MODULE MOUNT
and one saved:
806-010C U-BOLT 1/2-13 X 2 1/2 X 3 1/2
and two sets saved (not shown):
804-015C WASHER LOCK SPRING 1/2 PLT
803-020C NUT HEX 1/2-13 PLT
Install the bracket
behind Tower C (right center
seed tower), just above and parallel to the angle
that secures both towers to each other. Orient the
WSMB mounting face to the outside and forward.
Secure to tower with U-bolt
, lock washers
and nuts
. To avoid crushing the tower tube,
tighten only to Grade 2 torque specification.
259. Select the saved WSMB tagged as “5”:
467981100S1 INTAG WSMB MODULE 18R
and two sets new or saved:
804-006C WASHER LOCK SPRING 1/4 PLT
802-370C HHCS 1/4-20X1 3/4 GR5
Install WSMB
on the outside (wing side) of the
bracket
, with the connector ports facing down and to
implement rear. Insert bolts (
or
) through the
WSMB and bracket. Secure with lock
washers (
or
) and nuts
Figure 73: Tower B
WSMB#2 Mounting
Q0125
917
954
947
B
F
#2
917
187
177
917
187
177
183 954
173 947
Figure 74 Tower C
WSMB#5 Mounting
Q0125
917
954
947 173
C
G
#5
917
947
954
917
187
177
917
187
177
183 954
173 947
917
947
954