Bio-Rad Microplate Manager Software - Manual (Page 103)

Chapter 6. Data Formatting and Reports
93
Normalization Report
Figure 68. Normalization Report.
The Normalization Report displays absorbance or velocity data for each well as a
percentage of a range defined by the limits.
To set your limits, select Limits... from the OPTIONS menu. See the description of
the Limit Report above for more information about setting limits.
If custom limits are not selected in the Limits dialog box, the default upper limit is
the highest standard, unknown, or control absorbance/velocity value in the assay, and
the default lower limit is the lowest standard, unknown, or control
absorbance/velocity value in the same assay.
½
The default values displayed in the Limits dialog box are the ones used by the
Limit Report and the Matrix Report, but the default values used in the
Normalization Report are determined as described above.