Bio-Rad Microplate Manager Software - Manual (Page 74)

Microplate Manager User Guide
64
5.4 Features Unique to Multiple Plate
Protocols
The multiple plate protocol will perform single endpoint readings on a series of
plates and store these readings in separate data files with a common root file name.
This protocol may be used with or without a stack loader. With a stack loader, you
program the loader to load your plates in sequence. Without a stack loader, you will
be prompted to manually load and unload each plate in the sequence, up to the
number you specify in the protocol.
To run a new multiple plate protocol, select New Multiple Plate Protocol from the
FILE menu. This will open the Multiple Plate Protocol dialog box.