Bio-Rad Microplate Manager Software User Manual
Page 122
Microplate Manager User Guide
112
6.
Initiate the protocol by clicking on Run.
7.
At the end of the run, save the data by choosing Save Data/Template or Save
Data/Template As... from the FILE menu.
8.6 Creating and Running a Multiple Plate
Protocol with a Stored Template
See Chapter 5 for details.
1.
Select New Multiple Plate Protocol from the FILE menu.
2.
Fill in the information in the Multiple Plate Protocol dialog box:
a.
Specify any initial wait.
b.
Specify any absorbance delay.
c.
Specify reading parameters.
d.
Indicate if a stack loader is to be used.
e.
Specify the number of plates (if using a stack loader) or number of times
to read plate (if not using a stack loader).
f.
Specify the root file name for data storage.
3.
Click on Pick Template... and select data file which contains the desired
template.
4.
Choose all reports to be automatically displayed and/or printed by clicking on
Reports....
a.
While in the Reports dialog box, click on Labels... to choose labels to
print on each report.
b.
Also click on Fill Labels... to enter the text to be printed along with the
labels on each report.
c.
Close the Reports dialog box to return to the protocol.
5.
Save the protocol by choosing Save Protocol or Save Protocol As... from the
FILE menu.
6.
Initiate the protocol by clicking on Run.