Bio-Rad Microplate Manager Software - Manual (Page 53)

Chapter 4. Templates
43
Click on Calculate when all the information is entered. The dilution factors in the
Dilut. column will be automatically updated.
To use the automatic calculation feature, the least diluted unknown must be either the
first unknown (U1) or the last.
Repeat this procedure for each defined assay on your plate.
To implement your changes, click on OK.
4.4.5 Step 5. Select Regression Curve
To set the type of regression method and the axes for each standard curve, choose
Standard Curve Report from the VIEW menu. The Standard Curve dialog box will
open.
Figure 29. Standard Curve dialog box.