Bio-Rad Microplate Manager Software User Manual
Page 70
Advertising
Microplate Manager User Guide
60
To run a new kinetic protocol, select New Kinetic Protocol from the FILE menu.
Figure 43. Features of a kinetic protocol dialog box.
The controls common to all protocols are described in section Features Common to
All Protocols. The controls specific to kinetic protocols are described below.
5.3.1
Reading Sets
A reading set consists of the number of times a plate is read, the delay between each
reading, and (if desired) the mixing time before each reading. You can specify up to
five reading sets per protocol.
Reading sets
Analysis options
Advertising