Bio-Rad Microplate Manager Software - Manual (Page 112)

Microplate Manager User Guide
102
½
To automatically print reports immediately after a reading has been performed,
click on the Reports... button in a protocol dialog box. This will open a list of
reports. Click on the appropriate checkbox(es) to print the desired report (s).
When the protocol is finished running, the selected report(s) will be printed. See
section 5.1.6 for more information.
To select the font that will be used to print the report, select Page Setup.. . from the
FILE menu.
To preview your printout, select Print Preview from the FILE menu.
Printed reports include a header with information describing how the results were
derived. The following information is printed in the header of each report.
•
Title of the report.
•
Name of the data file.
•
Date and time of data acquisition.
•
Assay name. When assay-based reports are printed, each assay will begin on a
new page.
•
Any labels that have been defined.
•
Reading parameters. These vary depending on the read type. In all cases, the
measurement and reference (if used) wavelengths are printed.
•
Notes (if any).
Note that protocol settings cannot be printed by themselves.
7.2 Data Import and Export
Data in Microplate Manager can be imported and exported in a variety of formats.