Bio-Rad Microplate Manager Software User Manual
Page 99
Advertising
Chapter 6. Data Formatting and Reports
89
Limit Report
Figure 64. Limit Report.
If you have defined upper and lower limits for your data, each well is tagged with a
“+” if its absorbance/velocity is greater than the upper limit, a “*” if its
absorbance/velocity is between the upper and lower limit, and a “–” if its
absorbance/velocity is below the lower limit.
Setting Data Limits
The limits can be set or changed by selecting Limits... from the OPTIONS menu.
This will open the Limits dialog box.
Advertising