Bio-Rad Microplate Manager Software - Manual (Page 89)

Chapter 6. Data Formatting and Reports
79
6.6.2 Raw Image Report (Ultramark only)
The Raw Image Report is different from other reports in that it is an actual image of
your microplate with the wells and absorbance areas highlighted. This report is only
available if you performed a plate reading with the Ultramark using a custom
template. If you run a protocol using a standard template, well data is collected but
no image is generated. (See section 4.1.2 for more information about custom versus
standard templates.)
To open an image, select Raw Image Report from the VIEW menu.
Figure 53. Example of a Raw Image Report (1536-well plate).
½
Kinetic protocols will create multiple images: one for each absorbance reading.
Section of plate with absorbance data