Bio-Rad Microplate Manager Software User Manual
Page 106
Microplate Manager User Guide
96
Unknown Concentrations Report
Figure 70. Unknown Concentration Report
The Unknown Concentrations Report shows the calculated concentrations of the
unknown samples and the dilution and concentration information for all standards.
This report also provides statistics for each replicate group of wells, including mean,
standard deviation, and coefficient of variation.
At the bottom of the window, the type of curve fit and its equation are shown. If both
internal and external standards are defined, then both equations are displayed even
though only the external standards are used to calculate the unknown concentrations.
The type of axis selected may be inferred by examining the equation. For example, if
using a Log-Linear transformation, “Conc” is replaced with “Log(Conc)” on the
right-hand side of the equation.