Bio-Rad Microplate Manager Software User Manual
Page 95
Advertising
Chapter 6. Data Formatting and Reports
85
The Velocity Report displays the velocities of your well readings, based on the
analysis options you selected when you ran your kinetic protocol.
You can reopen the Analysis Options dialog box and change the settings by
selecting Analysis Options from the OPTIONS menu. See section 5.3.2 for more
information.
Adjusted Velocity Report
Figure 59. Adjusted Velocity Report.
The Adjusted Velocity Report displays the adjusted velocity for each well
calculated by subtracting the mean velocity of the blank wells from the raw velocities
displayed in the Velocity Report.
Advertising