Installing the system board, Figure 3-32 – Dell PowerEdge R415 User Manual
Page 146
146
Installing System Components
Figure 3-32. Removing and Installing the System Board
Installing the System Board
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is
not covered by your warranty. Read and follow the safety instructions that
came with the product.
1 Unpack the new system board.
2 Remove the labels from the processor shield and affix them to the system
identification panel on the front of the system. See Figure 1-1.
3 Replace the processors to the new system board. See "Removing a
Processor" on page 127 and "Installing a Processor" on page 130.
1
screw (9)
2
system board assembly
1
2
R415HOM.book Page 146 Friday, September 24, 2010 9:37 AM