Dell PowerEdge R415 User Manual
Page 37
About Your System
37
E2021 Incorrect
memory
configuration.
Review User
Guide.
Incorrect memory
configuration.
Check screen for specific
error messages. See
E2022 General
failure
during POST.
Check screen
message.
General failure after video. Check screen for specific
error messages.
E2026 Memory
initialization
error. Contact
support.
Invalid memory
configuration.
Ensure that the memory
modules are installed in a
valid configuration. See
E2110 Multibit Error
on DIMM ##.
Reseat DIMM.
The memory module in
slot “##” has had a
multi-bit error (MBE).
E2111 SBE log
disabled on
DIMM ##.
Reseat DIMM.
The system BIOS has
disabled memory
single-bit error (SBE)
logging and will not log
anymore SBEs until the
system is rebooted. "##"
represents the memory
module implicated by
the BIOS.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
Table 1-2. LCD Status Messages (Optional)
(continued)
Code
Text
Causes
Corrective Actions
R415HOM.book Page 37 Friday, September 24, 2010 9:37 AM