Dell PowerEdge R415 User Manual
Page 86
86
Installing System Components
If the drive has been online, the green activity/fault indicator flashes as the
drive is powered down. When the drive indicators are off, the drive is ready
for removal.
3 Press the release button on the front of the hard-drive carrier and open the
handle.
4 Slide the hard-drive carrier out until it is free of the drive bay. See
CAUTION:
To maintain proper system cooling, all empty hard-drive bays must
have drive blanks installed.
5 Insert a drive blank in the empty drive bay. See "Installing a Hard-Drive
6 If applicable, install the front bezel. See "Installing the Front Bezel" on
Figure 3-5. Removing and Installing a Hard-Drive Carrier
1
release button
2
hard-drive carrier handle
3
hard-drive carrier
1
2
3
R415HOM.book Page 86 Friday, September 24, 2010 9:37 AM