Dell PowerEdge R415 - Manual (Page 49)

About Your System 49
Time-of-day not
set - please run
SETUP program. Incorrect Time or Date
settings; faulty system
battery.
Check the Time and Date
settings. See "Using the
System Setup Program
and UEFI Boot Manager"
on page 57 . If the problem
persists, replace the system
battery. See "System Battery"
on page 133.
Timer chip
counter 2 failed. Faulty system board. See "Getting Help" on
page 181.
TPM or TCM
configuration
operation
honored. System
will now reset. A Trusted Platform Module
(TPM) or China Trusted
Platform Module (TCM)
configuration command has
been entered. The system
will reboot and execute the
command.
Information only.
TPM or TCM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security. This message displays during
system restart after a TPM or
TCM configuration
command has been entered.
User interaction is required
to proceed.
Enter I or M to proceed.
TPM or TCM
failure. A TPM or TCM function has
failed.
See "Getting Help" on
page 181.
Table 1-3. System Messages (continued)
Message Causes Corrective Actions
R415HOM.book Page 49 Friday, September 24, 2010 9:37 AM