Dell PowerEdge R415 - Manual (Page 53)

About Your System 53
Warning:
Following faulty
DIMMs are
ignored:
DIMM n1 n2
Total memory size
is reduced. Faulty or improperly seated
memory module(s). Check
both DIMMs in the same
channel for a possible fault.
See "Troubleshooting
System Memory" on
page 157.
Warning:
Following faulty
DIMMs are
disabled:
DIMM n1 n2
Total memory size
is reduced. Faulty or improperly seated
memory module(s). Check
both DIMMs in the same
channel for a possible fault.
See "Troubleshooting
System Memory" on
page 157.
Warning: The
installed memory
configuration is
not optimal. For
more information
on valid memory
configurations,
please see the
system
documentation on
the technical
support web site. Invalid memory
configuration. The system
will run but with reduced
functionality.
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 122. If the problem
persists, see
"Troubleshooting System
Memory" on page 157.
NOTE: For the full name of an abbreviation or acronym used in this table, see the
Glossary
at support.dell.com/manuals.
Table 1-3. System Messages (continued)
Message Causes Corrective Actions
R415HOM.book Page 53 Friday, September 24, 2010 9:37 AM