Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 16)

drive
indicators
Hard-drive
indicators
Provide information on the status of the respective hard drive (see " Hard-Drive Indicator Codes ").
NIC
indicators
Indicate whether the NIC has a valid link to the network (see " NIC Indicator Codes ").
Status LCD Can signify when the system is operating correctly or when the system needs attention (see " LCD Status
Messages ").
System
identification
button
Can be used to identify a particular system (see " System Identification Indicators ").
NMI button Can be used to troubleshoot software and device driver errors when using certain operating systems. This
button is often referred to as a "force dump switch" and can be pressed using the end of a paper clip. When
the option is enabled in the System Setup program and the button is pressed, an NMI alerts the system.
Use this button only if directed to do so by qualified support personnel or by the operating system's
documentation. For more information, see your User's Guide and the operating system's documentation.
Back-Panel Indicators and Features
Figure 3-3 shows the back-panel features of the system. Table 3-3 describes the back-panel features.
Figure 3-3. Back-Panel Features
Table 3-3. Back-Panel Features
Component Description
Power supply indicators Provides information on power status (see " Power Indicator Codes ").
NIC indicators Provides information on NIC status (see " NIC Indicator Codes ").