System fans, Removing a cooling fan, Replacing a cooling fan – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 41
5. Replace the front-panel I/O board (see "
Replacing the Front-Panel I/O Board
6. Replace the control-panel cable cover (see "
Replacing the Control-Panel Cable Cover
System Fans
The system includes the following hot-pluggable cooling fans:
Two system fans
One expansion-card fan
One microprocessor fan for each installed microprocessor
The system may also include other optional hot-pluggable fans.
Removing a Cooling Fan
NOTE:
The procedure for removing each individual fan is the same.
CAUTION:
See "Protecting Against Electrostatic Discharge" in the safety instructions in your System
Information document.
NOTICE:
The cooling fans are hot-pluggable. To maintain proper cooling while the system is on, replace only one fan
at a time.
1. Remove the cover (see "
2. Pull the fan straight up to clear the chassis (see
Figure 4-8. Removing and Installing a Cooling Fan
Replacing a Cooling Fan