Power supplies, Replacing the system-fan bracket, Removing a power supply – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 43
Replacing the System-Fan Bracket
CAUTION:
See "Protecting Against Electrostatic Discharge" in the safety instructions in your System
Information document.
1. Replace the system-fan bracket (see
a. Lower the bracket into the chassis, hooking the top bracket tabs into the slots in the rear chassis wall.
b. Swing the bottom of the bracket toward the rear chassis wall until the two side bracket tabs snap into place on
the rear wall.
2. Replace the two system fans (see "
Power Supplies
The system includes one or two hot-pluggable power supplies.
Removing a Power Supply
NOTICE:
The power supplies are hot-pluggable. The system requires one power supply to be installed for the system
to operate normally. The system is in the redundant mode when two power supplies are installed. Remove and replace
only one power supply at a time in a system that is powered on.