Control panel, Replacing the front-panel i/o board, Removing the control panel – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 39
Figure 4-6. Removing and Replacing the Front-Panel I/O Board
Replacing the Front-Panel I/O Board
CAUTION:
Before you perform this procedure, read the safety instructions in your System Information
document.
CAUTION:
See "Protecting Against Electrostatic Discharge" in the safety instructions in your System
Information document.
1. Lower the front-panel I/O board into the system and align the I/O board connector with the control panel board
connector (see
2. Press the I/O board toward the front panel to connect the I/O board to the control panel board (see
).
3. Replace the two screws that secure the front-panel I/O board in the system (see
).
4. Replace the control-panel cable cover (see "
Replacing the Control-Panel Cable Cover
Control Panel
Removing the Control Panel
CAUTION:
Before you perform this procedure, read the safety instructions in your System Information
document.
CAUTION:
See "Protecting Against Electrostatic Discharge" in the safety instructions in your System
Information document.