Boot sequence screen, Hard-disk drive sequence screen, Integrated devices screen – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 86
Boot Sequence — Displays the Boot Sequence screen, discussed later in this section.
Hard-Disk Drive Sequence — Displays the Hard-Disk Drive Sequence screen.
Integrated Devices — Displays the Integrated Devices screen.
PCI IRQ Assignment — Displays a screen that allows you to change the IRQ allocated to each of the integrated
devices on the PCI bus, and any installed expansion cards that require an IRQ.
PCIX Slot Information — Displays a menu that contains information about each of the system's PCI-X slots.
Console Redirection — Displays a screen that allows you to configure console redirection for use through the serial
port. The submenu allows you to turn the feature on or off, select the remote terminal type, and enable or disable
redirection after booting. For more information on using console redirection, your User's Guide.
Embedded Server Management — Displays a menu of three selectable fields: Front-Bezel Chassis Intrusion,
Front-Panel LCD Options, and User-Defined LCD String fields.
Front-Bezel Chassis Intrusion — Selecting this field allows you to enable or disable the chassis-intrusion
detection feature.
Front-Panel LCD Options — Selecting this field allows you to select whether you display the service tag, asset
tag, or a user-defined string in the front-panel display.
User-defined LCD String — Selecting this field allows you to enter the user-defined string to be displayed in
the front panel. Line 1 is five characters long, and Line 2 is 16 characters long.
System Security — Displays a screen that allows you to configure the system password and setup password features.
See "
Using the System Password Feature
" and "
Using the Setup Password Feature
" for more information.
Keyboard NumLock — Determines whether your system starts up with the NumLock mode activated on 101- or 102-
key keyboards (does not apply to 84-key keyboards).
Report Keyboard Errors — Enables or disables reporting of keyboard errors during the POST. This option is useful
when applied to self-starting or host systems that have no permanently attached keyboard. In these situations,
selecting Do Not Report suppresses all error messages relating to the keyboard or keyboard controller during POST.
This setting does not affect the operation of the keyboard itself if a keyboard is attached to the system.
Asset Tag — Displays the customer-programmable asset tag number for the system if an asset tag number has been
assigned. You can enter an asset tag number of up to 10 characters into NVRAM.
See your Resource CD for additional information on the asset tag utility.
Boot Sequence Screen
The Boot Sequence screen options determine the order in which the system looks for boot devices that it needs to load
during system startup. Available options include the diskette drive, CD drive, network, and hard drives. You can enable or
disable a device by selecting it and pressing the spacebar. To change the order in which devices are searched, use the <+>
and <–> keys.
Hard-Disk Drive Sequence Screen
The Hard-Disk Drive Sequence screen options determine the order in which the system searches the hard drives for the
files that it needs to load during system startup. The choices depend on the particular hard drives installed in your system. To
change the order in which devices are searched, use the <+> and <–> keys. Press <Enter> to confirm your selection.
NOTE:
Although you can change the device search order in the Hard-Disk Drive Sequence screen and select the boot
drive, Dell recommends that you do not change the default order in the Hard-Disk Drive Sequence screen.
Integrated Devices Screen
This screen is used to configure the following devices:
Integrated RAID Controller — Both channels A and B have the same settings. The configurable options will vary,