Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 24)

" Microprocessors ").
E0F04 POST DMA INIT DMA initialization failure; DMA
page register write/read failure.
Ensure that the memory modules are
properly installed. If the problem
persists, replace the faulty memory
module(s) (see " Memory Modules ").
E0F04 POST DMA REG Faulty system board. Replace the system board (see
" System Board ").
E0F04 POST KYB CNTRL Faulty keyboard controller; faulty
system board.
Replace the system board (see
" System Board ").
E0F04 POST MEM RFSH Main-memory refresh verification
failure.
Ensure that the memory modules are
properly installed. If the problem
persists, replace the faulty memory
module(s) (see " Memory Modules ").
E0F04 POST PIC REG Master or slave PIC register test
failure.
Replace the system board (see
" System Board ").
E0F04 POST SHADOW BIOS-shadowing failure. Ensure that the memory modules are
properly installed. If the problem
persists, replace the faulty memory
module(s) (see " Memory Modules ").
E0F04 POST SHD TEST Shutdown test failure.
E0F04 POST SIO Super I/O chip failure; faulty
system board.
Replace the system board (see
" System Board ").
E0F04 POST TIMER Programmable interval timer test
failure; faulty system board.
Replace the system board (see
" System Board ").
E0F0B POST ROM CHKSUM Faulty or improperly installed
expansion card.
Ensure that the expansion cards are
properly installed. If the problem
persists, replace the faulty expansion
card(s) (see " Expansion Cards ").
E0F0C VID MATCH CPU n Specified microprocessor is faulty,
unsupported, improperly installed,
or missing.
Ensure that the microprocessors are
properly installed. If the problem
persists, replace the faulty
microprocessor(s) (see
" Microprocessors ").
E10F3 LOG DISABLE
BIOS BIOS disabled logging errors. Check the SEL for details on the
errors.
E13F2 IO CHANNEL
CHECK Faulty or improperly installed
expansion card; faulty system
board.
Ensure that the expansion cards are
properly installed. If the problem
persists, replace the faulty expansion
card(s) (see " Expansion Cards "). If
the problem persists, replace the
system board (see " System Board ").
E13F4 PCI PARITY
E13F5 PCI SYSTEM
E13F8 CPU BUS INIT Faulty or improperly installed
microprocessor or system board.
Ensure that the microprocessors are
properly installed. If the problem
persists, replace the faulty
microprocessor(s) (see
" Microprocessors "). If the problem
persists, replace the system board
(see " System Board ").
E13F8 CPU BUS PARITY Faulty system board. Replace the system board (see
" System Board ").
E13F8 CPU MCKERR Machine check error; faulty or
improperly installed
microprocessor; faulty system
board.
Ensure that the microprocessors are
properly installed. If the problem
persists, replace the faulty
microprocessor(s) (see
" Microprocessors "). If the problem
persists, replace the system board
(see " System Board ").
E13F8 HOST BUS Faulty system board. Replace the system board (see
" System Board ").