Replacing the cd and diskette drives on the tray – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 55
Advertising

Replacing the CD and Diskette Drives on the Tray
CAUTION:
See "Protecting Against Electrostatic Discharge" in the safety instructions in your System
Information document.
1. Install the diskette drive on the drive tray (see
a. Lower the left side of the drive to the tray with the tray's pins aligned with the drive's holes.
b. Pull the drive securing lever to the right and lower the right side of the drive onto the tray.
2. Connect the cable to the diskette drive (see
):
a. Ensure that the securing latch on the drive's connector is in the released position.
b. Slide the cable into the drive's connector.
c. Press the cable securing latch into the locked position.
3. Install the CD drive on the drive tray (see
Advertising