Dell PowerVault TL1000 - Manual (Page 100)

– IP address - IPv4 and IPv6 addresses are supported.
– Community (v1 or v2c) - SNMP community name.
– User name (v3 only) - SNMPv3 unique user name.
– Authentication (v3 only) - Authentication algorithm, MD5, or SHA. When an
algorithm is specified, an authentication password and confirmation of the
password are required.
– Privacy (v3 only) - Privacy service encryption and decryption algorithm, DES
or AES. When an algorithm is specified, a privacy password and confirmation
of the password are required.
v SNMPv3 User List - SNMPv3 users who can access the tape library.
– Validity - Enable/Disable setting.
– User name - SNMPv3 unique user name.
– Authentication - Authentication algorithm, MD5, or SHA. When an algorithm
is specified, an authentication password and confirmation of the password are
required.
– Privacy - Privacy service encryption and decryption algorithm, DES or AES.
When an algorithm is specified, a privacy password and confirmation of the
password are required.
Click Test to send a test trap to the IP addresses enabled in the Trap to fields.
Click Submit to transfer the settings to the library. A dialog message is displayed
when the settings are updated successfully.
Click Refresh to read the current settings from the library.
Saving and restoring configuration settings
Your library configuration can be saved and restored automatically by a cookie and
manually by with the Web User Interface. It is recommended that you use the Web
User Interface method whether you use the cookie method.
Important: Verify all configuration settings after your library configuration is
restored. Reset the library date and time (see “Configuring date and
time settings” on page 4-28).
Saving and restoring configuration automatically with cookies
If allowed by your web browser preference settings, cookies are employed to
automatically save your library configuration on your host computer and
automatically restore your library configuration if your library network
configuration uses a static IP address. The following flowchart illustrates how VPD
data is saved from and restored to a library with cookies.
4-32 Dell PowerVault TL1000 Tape Autoloader User's Guide