Dell PowerVault TL1000 - Manual (Page 107)

2. Use Service Library > Firmware Update and click Browse to locate the library
firmware file with extension ".fmg" (for example, TL1000_31.3000.fmg) or the
LTO SAS drive firmware file with extension".ro" (for example, 85F0L3AH.ro)
that you downloaded from the Dell web site, then click Update. The Web User
Interface indicates that the operation is complete. This means that the firmware
file is successfully moved from the host computer to the library.
3. Wait for the library to reboot before normal library operations resume. It can
take several minutes before the library reboots.
4. Verify the firmware update by viewing the System Summary on the Web User
Interface.
Important: After the update process starts, you must wait until the library reboots.
Do not attempt to interrupt the process in any way, or the upgrade will
not be successful.
Accessor statistics
Select Service Library > Usage Statistics to view statistics information about the
movement of the robotics of the library.
v Motion counts - Lists the accumulated operation count for all movements,
accessor movements, picker movements, and X-axis movements.
v Retry counts - Lists the accumulated number of retries (reattempts to load
cartridges) in the drive and the cartridges positions by the accessor.
v Error counts - Lists the accumulated number of errors for the accessor, X-axis
movements, and drive load and unload operations.
Click Refresh to read the accessor statistics from the library. The Last refresh
shows the time of the most recent library data refresh.
a29z0135
Figure 4-55. Usage Statistics screen
Chapter 4. Operations 4-39
|
|