Dell PowerVault TL1000 - Manual (Page 118)

Examples of cartridge problems
Example: Split Cartridge Case (see “Perform a thorough inspection” on page 5-9)
The cartridge's case is damaged. There is a high possibility of media damage and
potential loss. Perform the following steps:
1.
Look for cartridge mishandling.
2. Use the Leader Pin Reattachment Kit (part number 08L9129) to correctly seat
the pin. Then, immediately use data recovery procedures to minimize chances
of data loss.
3. Review media-handling procedures.
Example: Improper Placement of Leader Pin
1.
Look for cartridge damage.
2. Use the Leader Pin Reattachment Kit (part number 08L9129) to correctly seat
the pin. Then, immediately use data recovery procedures to minimize chances
of data loss.
Environmental and shipping specifications for tape cartridges
Before you use a tape cartridge, acclimate it to the operating environment for 24
hours or the time necessary to prevent condensation in the drive (the time varies,
depending on the environmental extremes to which the cartridge was exposed).
The best storage container for the cartridges (until they are opened) is the original
shipping container. The plastic wrapping prevents dirt from accumulating on the
cartridges and partially protects them from humidity changes.
When you ship a cartridge, place it in its jewel case or in a sealed, moisture-proof
bag to protect it from moisture, contaminants, and physical damage. Ship the
cartridge in a shipping container that has enough packing material to cushion the
cartridge and prevent it from moving within the container.
Table 5-7 gives the environment for operating, storing, and shipping LTO Ultrium
Tape Cartridges.
Table 5-7. Environment for operating, storing, and shipping the LTO Ultrium Tape Cartridge
Environmental Specifications
Environmental Factor Operating Operational Storage 1 Archival Storage 2 Shipping
Temperature 10 - 45°C (50 - 113°F) 16 - 32°C (61 - 90°F) 16 - 25°C (61 - 77°F)
-23 to 49°C (-9 to
120°F)
Relative humidity
(non-condensing)
10 - 80% 20 - 80% 20 - 50% 5 - 80%
Maximum wet bulb
temperature
26°C(79°F) 26°C(79°F) 26°C(79°F) 26°C(79°F)
Note:
1. The short term or operational storage environment is for storage durations of up to six months.
2. The long term or archival storage environment is for durations of six months up to 10 years.
5-10 Dell PowerVault TL1000 Tape Autoloader User's Guide