Dell PowerVault TL1000 - Manual (Page 91)

Configuring the library
Managing user access
Select Configure Library > User Access to add, modify, or remove administrator,
superuser, and user accounts, and to change passwords. Up to 7 users can be
configured with the Web User Interface.
Add, modify, or remove users with the following information:
v Select action
– Add - To add new users.
– Modify - To change the selected user’s access role or password.
– Remove - To delete the selected user from the system.
v User Name - The user name of a registered user.
v Password - Case-sensitive password for the registered user.
v Role - The user access level for the registered user.
– Users are allowed to monitor the library, but not complete actions that affect
the physical library.
– Superusers are allowed to operate the physical and logical library, but not
complete actions that affect the library configuration.
– Administrator users are allowed access to the entire physical library and
logical library, including configuration. Only one administrator user must be
assigned the login name admin.
An administrator can add/modify/remove extra administrator, superuser, and user
accounts, and change passwords. User accounts are restricted to specific areas of
the library. For more information, see Chapter 2, “User interfaces,” on page 2-1.
A User account can be modified by an administrator to provide a user with
superuser or administrator access permissions to the library functions.
Enter all user IDs and passwords on the Library Configuration form in
Appendix D, “Library Configuration Form,” on page D-1.
a29z0122
Figure 4-37. User Access screen
Chapter 4. Operations 4-23