Dell PowerVault TL1000 - Manual (Page 67)

4. When prompted, insert a customer supplied scratch cartridge into the I/O
station.
When the scratch cartridge is loaded, the bar code reader reads the bar code
label on the cartridge and stores it for later comparison. The cartridge is then
moved to the tape drive, where the drive runs its own write/read/verify test.
When the test is done, the library tells the drive to eject the cartridge, and then
the cartridge is moved back to the I/O station. The bar code is read again and
compared with the value stored earlier.
5. When prompted, remove the cartridge from the I/O station.
The result of the test is reported on the Operator Panel.
If an error occurs, note the error code number and see Appendix A, “Error
codes,” on page A-1.
6. Press Cancel to return to the top-level menu.
Taking the Library Online
When your library is configured, you are ready to save the library configuration
and take the library online.
Note: The tape drive is always online, regardless of whether the library is online
or offline.
To take the library online with the Operator Panel:
1.
From the top menu screen, press the Minus key to select Commands, and press
Enter
.
2. Select Change Library State, and press Enter.
3. Select Set Library Online, and press Enter.
4. Press Cancel repeatedly to return to the top-level menu.
5. Press the Minus key to select Logout, and press Enter.
To take the library online with the Web User Interface:
1.
Save the library configuration.
a.
Expand Configure Library, if necessary, and click Save/Restore in the left
navigation pane of the Web User Interface.
b. Click Save, and then enter a file name and select a location to save the
configuration file.
2. Verify the library state.
a.
Click Library State in the left navigation pane of the Web User Interface.
b. If the library is offline, click Bring Online.
c. Click Yes to confirm when prompted.
A message dialog displays when the operation is completed.
3. Click Logoff in the upper right corner of the window.
Registering for support notification
Support notification registration provides email notification when new firmware
levels are updated and are available for download and installation.
Enter your user name and password on the Appendix D, “Library Configuration
Form,” on page D-1.
Chapter 3. Installation and configuration 3-29