Dell PowerVault TL1000 - Manual (Page 79)

Configuring date and time settings
Select Configuration > Configure Library > Configure Date/Time to set the date
and time on your library manually after a power disruption and when daylight
saving time starts and ends. The date is set in MM/DD/YYYY format, and the
time is set in 24-hour HH:MM:SS format.
The current date and time is also controlled automatically with a network-based
Network Time Protocol (NTP) server. For more information, see “Configuring
network settings” on page 4-12.
Configuration
Configure Library
Configure Date/Time
Set Date
Set Time
Figure 4-20. Date and time settings
Chapter 4. Operations 4-11