Managing user access, User access settings, Add user dialog – Dell PowerVault TL1000 User Manual
Page 61
v
Privacy
- Privacy service encryption and decryption algorithm, DES or AES.
When an algorithm is specified, a privacy password and confirmation of the
password are required.
7.
Select the event level to report in the Trap event field.
8.
Click Test to send a test trap notification to the enabled IP addresses.
9.
Click Submit to enable the settings.
Managing user access
Note:
This procedure is optional.
To add users able to access the library with the Web User Interface:
1.
Expand Configure Library, if necessary, and click User Access in the left
navigation pane of the Web User Interface.
2.
Select the Add action in the menu.
v
Add
- To add new users.
v
Modify
- To change the selected user's access role or password.
v
Remove
- To delete the selected user from the system.
3.
Enter the user name and password information in the dialog box.
a29z0122
Figure 3-24. User access settings
a29z0139
Figure 3-25. Add User dialog
Chapter 3. Installation and configuration
3-23