Saving the library configuration, Configuring your library with the operator panel, Logging in to the operator panel – Dell PowerVault TL1000 User Manual
Page 62: Configuring network settings, Save configuration
4.
Assign a user access role.
v
User
- User access permission allows users to monitor the library, but not to
complete functions that affect the library.
v
Superuser
- Superuser access permission allows users to operate the physical
and logical library, but not to change configuration settings.
v
Administrator
- Administrator access permission allows users to complete
tape library functions and change configuration settings.
5.
Click Submit to enable the settings.
Saving the library configuration
Note:
This procedure is recommended.
Each time that you change the configuration of your library, save the configuration.
This function also maintains several library configuration profiles that can be
restored to the library when wanted with the Web User Interface.
To save library configuration:
1.
Expand Configure Library, if necessary, and click Save/Restore in the left
navigation pane of the Web User Interface.
2.
Click Save to create a configuration file of your library on your computer.
Configuring your library with the Operator Panel
To configure your library with the Operator Panel, complete the following
procedures:
1.
“Logging in to the Operator Panel”
2.
“Configuring network settings”
3.
“Configuring library settings” on page 3-26
Logging in to the Operator Panel
In many environments, the default network settings might be sufficient to access
your tape library on a network. To change the default network settings with the
Operator Panel, complete the following procedure:
1.
When the library is initialized, press Enter to move to the Password screen.
2.
Enter 0000, the default password. The top menu screen displays.
3.
When finished with the Operator Panel, press Cancel to return to the top menu
screen.
4.
When finished, press the Minus key to select Logout, and press Enter.
Configuring network settings
In many environments, the default network settings might be sufficient to access
your tape library on a network. To change the default network settings with the
Operator Panel, complete the following procedure:
1.
From the top menu screen, press the Minus key to select Configuration, and
press Enter.
a29z0129
Figure 3-26. Save configuration
3-24
Dell PowerVault TL1000 Tape Autoloader User's Guide