Dell PowerVault TL1000 - Manual (Page 69)

Chapter 4. Operations
“The Operator Panel”
on page 4-3 Monitoring the Library “Configuration settings” on page 4-3
“Current information” on page 4-4
“Firmware revision” on page 4-4
Managing the Library “Unlocking the I/O station” on page 4-4
“Unlocking the cartridge magazine” on page 4-5
“Moving cartridges” on page 4-6
“Unloading the drive” on page 4-6
“Cleaning the drive manually” on page 4-6
“Conducting a library inventory” on page 4-7
“Taking the library online and offline” on page 4-7
“Powering down the library” on page 4-7
“Shipping the library” on page 4-7
“Rebooting the drive” on page 4-8
“Rebooting the library” on page 4-8
“Logging out of the library” on page 4-8
Configuring the Library “Configuring auto cleaning” on page 4-9
“Configuring the number of active slots” on page 4-9
“Configuring the library access mode” on page 4-10
“Configuring date and time settings” on page 4-11
“Configuring network settings” on page 4-12
“Configuring Operator Panel settings” on page 4-13
“Setting the library to factory defaults” on page 4-13
Servicing the Library “Checking the library error status” on page 4-14
“Running library verify diagnostic procedures” on page 4-14
“Running drive diagnostic procedures” on page 4-15
4-1