Dell PowerVault TL1000 - Manual (Page 19)

Chapter 1. Product description
“Front panel” on page 1-2
“Cartridge magazine” on page 1-4
“Rear panel” on page 1-5
“Bar code reader” on page 1-6
“SAS host interface” on page 1-6
“Encryption” on page 1-6
“Supported Internet Protocols” on page 1-7
“Simple Network Management Protocol (SNMP) messaging” on page 1-7
“Network Time Protocol” on page 1-7
“Ultrium tape drives” on page 1-8
“Media” on page 1-8
“Logical Unit Number (LUN) scanning” on page 1-9
“Location coordinates and element addresses” on page 1-9
“Library specifications” on page 1-10
“Product environment” on page 1-11
“Supported device drivers” on page 1-12
The Dell ™ PowerVault ™ TL1000 Tape Autoloader provides compact, high-capacity,
low-cost solutions for simple, unattended data backup. The library has a compact
1U form factor with easy access to tape cartridges with a removable magazine. The
TL1000 Tape Autoloader is an external stand-alone or rack-mountable unit that
incorporates an Ultrium 6 Half-High Tape Drive (Model S6H), Ultrium 5 Half-High
Tape Drive (Model S5H), or Ultrium 4 Half-High Tape Drive (Model S4H). It is
equipped with a SAS (Serial Attached SCSI) host adapter attachment that has a
data transfer rate of up to 6.0 Gbps.
The TL1000 Tape Autoloader has a 10-position removable cartridge magazine,
providing a maximum of 9 data cartridge positions, or a maximum of 8 data
cartridge positions with a configurable 1-slot I/O station. One position is reserved
as the tape drive exchange position and can be accessed by the library only. Tape
cartridges that are supported in the TL1000 Tape Autoloader include the 2500 GB
native physical capacity LTO Ultrium Tape Cartridge (Ultrium 6), 1500 GB native
physical capacity LTO Ultrium Tape Cartridge (Ultrium 5), 800 GB native physical
capacity LTO Ultrium Tape Cartridge (Ultrium 4), 400 GB Tape Cartridge (Ultrium
a29z0176
Figure 1-1. TL1000 Tape Autoloader
1-1
|
|
|
|
|