Dell PowerVault TL1000 - Manual (Page 72)

Current information
Use View Current Information to display the network settings information.
The settings that are displayed include:
v Network settings
– Worldwide node name
– IP address protocol stack
– IP address
Firmware revision
Select Service > View Firmware Revision to display the current version of the
library firmware.
Managing the library
Unlocking the I/O station
Select Unlock I/O Station to unlock the I/O station. This menu option is available
only when the I/O station is enabled in the library configuration settings.
View Current Information
Figure 4-3. Current information
Service
View Firmware Revision
Figure 4-4. Firmware revision
Unlock I/O Station
Figure 4-5. Unlock I/O station command
4-4 Dell PowerVault TL1000 Tape Autoloader User's Guide