Dell PowerVault TL1000 - Manual (Page 88)

Managing the library
Moving cartridges
Use Manage Library > Move Cartridges to move data and cleaning cartridges
between the I/O station, storage positions, inactive slots, and tape drive. Move
cartridges by clicking and dragging a cartridge from one location to another, or by
right-clicking a cartridge and selecting a destination.
Select a cartridge to display information for that cartridge in the Source pane on
the right side of the page. Drag the cartridge to a valid destination location to
display information in the Destination pane. Release the mouse button to run the
move.
The following information is displayed:
v Source
– Location coordinates in the library (Column, Tier)
– Slot type (Storage, I/O station, or Cleaning)
– Element address
– Cartridge label
– Encryption capability for storage cartridges
– Remaining uses for cleaning cartridges. When a cleaning cartridge is added to
the library (I/O station or cleaning slot) the remaining uses are displayed as
50. The actual remaining uses are updated when the cleaning cartridge is
loaded into the tape drive. See “Cleaning cartridge” on page 5-4.
– Media status (OK, Degraded, or Failed)
v Destination
– Location coordinates in the library (Column, Tier)
– Status (for the tape drive)
– Slot type and element address
a29z0116
Figure 4-30. Move Cartridges screen
4-20 Dell PowerVault TL1000 Tape Autoloader User's Guide